|NO||8||DATE||Aug. 11. 2010||HIT||3055|
|TITLE||Volume No. 8|
l M3 Products
M3 Box Label will be changed and settled by September
We will decide whether to spread a changed M3 box label to other regions after operating a pilot program in Korea. The program is currently being operated in its pilot stage, with new M3 Ordering Code in Korea and will be expanded to overseas from October after making up for the weak points in this trial label by September.
A M3 Label on the Gift Box / Carton Box has been changed to improve management of M3 products as below;
The following label is a trial version, and this pilot program is designed to deal with any faults before wholly operated and study in all its aspects in the system.
- The size of new M3 Label became bigger
- Model name and main specifications are written on the label to discern the product with ease.
- P/N is made up of production date (ex. JF16351) and production order
- IMEI (the International Mobile Equipment Identity) Number is also written on the label.
After (real size) (real box picture)
※ The ‘Option’ numbers on the above trial M3 Label come with new M3 Ordering Code that will be released in September after completing a pilot order program as well.
M3 Sky AZERTY Keypad Developed for French-speaking countries
[M3 Sky AZERTY Keypad] [M3 Sky QWERTY Keypad]
l Technical Issue: Troubleshooting
M3 Green: How to Use Chinese Characters in English OS
For displaying Chinese characters in English OS, register the Chinese font in Registry and save the folder. 20MB will be needed because the executable program is about 10MB and more 10MB is needed to register the font. This process does not support entering the language and to input the language, other Third Party Solution is needed.
M3 Green: Scanner Malfunction
In case ScanEmul icon is displayed at the task bar but cannot scan,
Need to change M3.ini file.
Above setting will
display ScanEmul icon at the task bar but scanner does not work after reset.
Need to change ‘Install=1’ in order to use scanner.
l Technical Issue: FAQ
M3 FAQ list is uploaded in the M3 Technical Support website: http://support.m3mobile.co.kr
M3 T MC-6700S 18pin I/O PIN Description
This document describes the type and usage of 18pin connector of M3 T MC-6700S located at the bottom of the device.
1. 18PIN Connector (Honda BCL-C18LMYG)
Mated connector Desktop
2. Pin Description
M3 SKY Key Customization
M3 SKY has 6 or 8 customizable keys depending on the phone module option.
There are 3 ways to customize the keys:
1) Using Windows Mobile GUI,
2) Editing M3.INI,
3) Using VisualINI
1. Using Windows Mobile GUI
Those keys can be customized as the following (note that M3 SKY may use either WM 5.0 or 6.1):
To demonstrate customizing procedures, MC-7110S (WM 6.1, HSDPA) and MC-7500S (WM 5.0, non-GSM) are used as examples.
You can assign the following functions to the keys. All keys have the same customization options. Note that ‘Yellow’ and ‘Blue’ keys have ‘VK_F14’ as the default value.
2. Using VisualINI
To use VisualINI, first you need to install it. VisualINI installation file is located in the Driver folder in the Flash Disk as shown in figure 3.1. To install VisualINI, just click on the file. You must soft reset the device after the installation.
Then, you can find StartUp icon at Start → Settings → System as shown in figure 3.2. Tapping the icon will bring up the screen as shown in figure 3.3.
In the StartUp window, user must set the correct device model (①) then, click ‘OK’ button to confirm it (②). Before going to the next step, the device must go through soft reset. Then, launch StartUp again to customize the keys. From figure 3.3, go into SideKey window (③) for key customization. M3 SKY SideKey customization window is shown in figure 3.4.
M3 SKY MC-7110S (WM 6.1, HSDPA)
(3.1.1) (3.2.1) (3.3.1) (3.4.1)
Note that in figure 3.4.1, ‘Yellow’ and ‘Blue’ customizing fields are disabled since the device is equipped with HSDPA (phone).
|PREV||Volume No. 9|
|NEXT||Volume No. 7|